In early 2017, AMD released processors based on the new architecture – Zen. These processors were codenamed Ryzen and quickly gained user recognition due to their high performance and low price. The second generation of Ryzen processors was released at the beginning of 2018, and the Ryzen 5 2600 processors belong to the second generation. These processors have received many improvements and higher performance compared to the previous generation. In this article, we will consider the best motherboard for Ryzen 5 2600. But first, let’s figure out what to look for when choosing a motherboard.
Which Motherboard To Choose For Ryzen
When choosing a motherboard for Ryzen processors, you should first pay attention to the following parameters:
Socket – socket for installing the processor. All Ryzen processors that have been released currently use the AM4 socket. Naturally, Intel motherboards with sockets will not work for us;
A chipset is a chipset for controlling a processor, motherboard, and other components of a computer. The Ryzen 2600 is supported by both the first-generation chipsets (A350, B350, X370) after their flashing.
And the new ones specially developed for this generation of processors (A450, B450, X470), which have several advantages over the old ones. In turn, the chipsets of the same generation are also different. Series A chipsets are designed for budget assemblies, there is almost no overclocking.
B chipsets are already more powerful, they support overclocking and most of the necessary technologies. The X series chipsets are the oldest, they are better suited for overclocking and in addition support the installation of several video cards and SLI technology.
Radiator – used to cool the components of the motherboard. It is very important that the board has good radiators, especially during overclocking.
The number of power circuits – if you are going to overclock the processor, you should also pay attention to the number of power circuits. The more power circuits, the less heat will be generated and acceleration will work better.
Form factor – determines what size your motherboard will be. Commonly used ATX form factor (305 × 244mm). But if you want to assemble a computer in a compact package, then you need Mini-ATX (244 × 244mm) or micro-ITX (170 × 170mm) boards.
Now let’s look at the best motherboard for ryzen 5 2600 that you can use with this processor.
Best Motherboard For Ryzen 5 2600
In order not to be repeated in the description of each motherboard, we consider the general characteristics of all motherboards here in this list:
- Form Factor: ATX;
- Socket: AM4;
- RAM Type: DDR4;
- Number of RAM slots: 4;
- Number of RAM channels: 2;
- The maximum amount of RAM: 64 GB;
- RAID support: 0/1/10;
- Additional ports: PS / 2;
Now let’s move on to our list of motherboards.
1. ASROCK X470 MASTER SLI
This is the best overclocking motherboard for the ryzen 5 2600 in terms of price-performance ratio. You get an older new generation X450 chipset, two M.2 slots, support for combining graphics cards using AMD Crossfire or NVIDIA SLI.
You will also get a fairly good processor and chipset power system for convenient overclocking. Of the benefits of a sound system is the presence of an optical S / PDIF output.
- Price: $ 169;
- Maximum RAM frequency: 3466 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 6 pcs;
- USB 3.1: 1 pc;
- USB Type-C: 1 pc;
- USB 3.0: 10 pcs;
- USB 2.0: 4 pcs;
- PCIe 3.0 x16: 1 pc;
- PCIe 2.0 x4: 1 pc;
- PCIe 2.0 x1: 4 pcs;
- Association of video cards: SLI, CrossFire (two cards);
- Video Outputs: HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Intel I211-AT.
- Number of fans: 3 pcs;
- Power scheme: 8 + 4 phases;
2. GIGABYTE B450 AORUS ELITE
This is the best motherboard for the Ryzen 5 2600 on the average chipset. It is designed for second-generation Ryzen processors, but will also support first-generation processors.
Of course, compared with the first option, it has fewer features, for example, there is no SLI support and, there is no USB 3.1 Gen2 and it is cheaper. But for overclocking, it is also suitable.
Of the advantages, it is possible to control the bandwidth individually for each program, as well as support for voltage regulation for overclocking.
- Price: $ 203;
- Maximum RAM frequency: up to 3200 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 6 pcs;
- USB 3.1: 2 pcs;
- USB Type-C: 2 pcs;
- USB 3.0: 10 pcs;
- USB 2.0: 4 pcs;
- USB connectors: 5 USB 3.1 Gen1, 2 USB 3.0;
- PCIe 3.0 x16: 1 pc;
- PCIe 2.0 x4: 1 pc;
- PCIe 2.0 x1: 2 pcs;
- Combining video cards: only CrossFire (two cards);
- Video Outputs: DVI-D, HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: GIGABYTE Exclusive 8118 Gaming LAN.
- Number of fans: 5;
- Power scheme: 8 + 3 phases.
3. MSI B450 TOMAHAWK
This motherboard is often recommended on various sites and forums and for good reason. It has proven itself as a best motherboard for Ryzen 5 2600.
You can connect two video cards to it, combine them using AMD Crossfire. The motherboard also has a good 6-phase power system and a reinforced heatsink, which will allow the processor to overclock without overheating the power circuits.
Also, overclocking benefits include the presence of LLC profiles, as well as a convenient and understandable BIOS.
- Price: $ 134;
- Maximum RAM frequency: up to 3466 MHz;
- M.2 connectors: 1 pc;
- SATA connector: 6 pcs;
- USB 3.1: 5 pcs;
- USB Type-C: 1 pc;
- USB 3.0: 0 pcs;
- USB 2.0: 6 pcs;
- PCIe 3.0 x16: 2 pcs (x16 and x8);
- PCIe 2.0 x4: 1 pc;
- PCIe 2.0 x1: 3 pcs;
- Combining video cards: only CrossFire (2 cards);
- Video Outputs: DVI-D, HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Realtek RTL8111H;
- Number of fans: 6 pcs;
- Power scheme: 4 + 2 phases;
4. MSI X470 GAMING PLUS
Despite the fact that this motherboard is developed on the x470 chipset, it has several disadvantages. Firstly, SLI is not supported here and there is no USB Type-C port gaining popularity.
It also uses a network chip from Realtek, while Intel uses more expensive boards on this chipset. One of the advantages is that you can install three video cards in this board and combine them through AMD Crossfire.
- Price: $ 189;
- Maximum RAM frequency: up to 3466 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 6 pcs;
- USB 3.1: 2 pcs;
- USB Type-C: 0 pcs;
- USB 3.0: 8 pcs;
- USB 2.0: 6 pcs;
- PCIe 3.0 x16: 2 pcs;
- PCIe 2.0 x4: 1 pc;
- PCIe 2.0 x1: 3 pcs;
- Combination of video cards: CrossFire (3 cards);
- Video Outputs: DVI-D, HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Realtek RTL8111H;
- Number of fans: 5 pcs;
- Power scheme: 11 phases;
5. GIGABYTE X470 ULTRA GAMING
A good, but quite an expensive motherboard from Gigabyte on the older X470 chipset. It supports combining two graphics cards using AMD CrossFire and NVIDIA SLI.
Also, the motherboard has a good power scheme and radiators, so there should not be problems with overclocking.
- Price: $ 199;
- Maximum RAM frequency: up to 3200 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 6 pcs;
- USB 3.1: 5 pcs;
- USB Type-C: 1 pc;
- USB 3.0: 0 pcs;
- USB 2.0: 4 pcs;
- PCIe 3.0 x16: 2 pcs (x16 + x8);
- PCIe 3.0 x4: 1 pc;
- PCIe 2.0 x1: 1 pc;
- Combination of video cards: CrossFire, SLI (2 cards);
- Video Outputs: HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Intel GbE LAN;
- Number of fans: 5 ports;
- Power scheme: 8 + 3 phases;
6. ASUS PRIME X470-PRO
Another motherboard for Asus AMD Ryzen 5 2600, built on the older X470 chipset. Like all ASUS motherboards, there is an adjustable backlight and several connectors for connecting LED strips. Also, the advantage of the board is the ability to connect seven fans to cool the case.
- Price: $ 153;
- Maximum RAM frequency: up to 3600 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 6 pcs;
- USB 3.1: 8 pcs;
- USB Type-C: 1 pc;
- USB 3.0: 0 pcs;
- USB 2.0: 2 pcs;
- PCIe 3.0 x16: 2 pcs;
- PCIe 2.0 x4: 1 pc;
- PCIe 2.0 x1: 3 pcs;
- Combination of video cards: CrossFire, SLI (two cards);
- Video Outputs: HDMI, DisplayPort;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Intel I211-AT;
- Connection of fans: 7;
- Power scheme: 6 + 2 phases;
7. ASUS ROG STRIX B450-F GAMING
The best motherboard for Ryzen 5 2600 from ASUS is already on the average B450 chipset. It is cheaper than the previous version, but almost inferior to it in terms of capabilities, of course, except for SLI support.
It also has a beautiful proprietary backlight, supports the integration of up to three video cards using AMD Crossfire, as well as RAM with a frequency of up to 3600 MHz.
- Price: $ 149;
- Maximum RAM frequency: up to 3600 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 4 pcs;
- USB 3.1: 2 pcs;
- USB Type-C: 1 pc;
- USB 3.0: 6 pcs;
- USB 2.0: 6 pcs;
- PCIe 3.0 x16: 2 pcs (x16 + x0 or x8 + x4);
- PCIe 2.0 x4: 1 pc;
- PCIe 3.0 x1: 3 pcs;
- Combination of video cards: CrossFire (3 cards);
- Video Outputs: DisplayPort, HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Intel I211-AT;
- Fan connection: 7 pcs;
- Power scheme: 6 + 2 phases;
8. MSI B350 PC MATE
This is the best motherboard for the Ryzen 5 2600 based on the previous generation chipset – B350. In terms of price to opportunities, this is one of the best offers for those who want to save money.
The previous generation chipset fully supports new processors, supports overclocking, but it does not have some additional features.
- Price: $ 113;
- Maximum RAM frequency: up to 3200 MHz;
- M.2 connectors: 1 pc;
- SATA connector: 4 pcs;
- USB 3.1: 5 pcs;
- USB Type-C: 1 pc;
- USB 3.0: 0 pcs;
- USB 2.0: 6 pcs;
- PCIe 3.0 x16: 2 pcs (x16 and x8);
- PCIe 2.0 x4: 1 pc;
- PCIe 3.0 x1: 2 pcs;
- Combination of video cards: CrossFire (2 cards);
- Video Outputs: HDMI, DVI-D, VGA;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Realtek 8111H;
- Fan connection: 6 pcs;
- VRM power supply: 4 + 2 phases;
Best Motherboard For Ryzen 5 2600 On MINI-ATX
If you want to build a compact computer in a small case, you will need a Mini-ITX form factor motherboard. Here, all the general characteristics from the last section are relevant, only the Mini-ATX form factor
9. MSI B450M MORTAR
One of the best motherboard for Ryzen 5 2600, which is suitable for use in small cases.
It has several limitations compared to ATX boards, for example, there are fewer SATA connectors, fewer connectors for fans, and also there are no radiators on some batteries.
But in general, the board is quite good and will work fine even with eight-core processors.
- Price: $ 128
- Form Factor: Micro-ATX (24.4 x 24.4 cm)
- Maximum RAM frequency: up to 3466 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 4 pcs;
- USB 3.1: 5 pcs;
- USB Type-C: 1 pc;
- USB 2.0: 0 pcs;
- USB 2.0: 8 pcs;
- PCIe 3.0 x16: 1 pc;
- PCIe 2.0 x4: 1 pc;
- PCIe 3.0 x1: 2 pcs;
- Combining video cards: CrossFire;
- Video Outputs: DisplayPort, HDMI;
- Audio system: 7.1, Realtek ALC892 codec;
- Network adapter: Realtek 8111H;
- Fan connection: 3 pcs;
- VRM power supply: 6 phases;
10. GIGABYTE B450M DS3H
Another option with almost the same specifications, but without a USB Type-C connector. AMD CrossFire is also supported here, there is one slot for M.2 and a good processor power system.
- Form Factor: Micro-ATX (24.4 x 24.4 cm)
- Maximum RAM frequency: up to 3200 MHz;
- M.2 connectors: 2 pcs;
- SATA connector: 4 pcs;
- USB 3.1: 6 pcs;
- USB Type-C: 0 pcs;
- USB 3.0: 0 pcs;
- USB 2.0: 6 pcs;
- PCIe 3.0 x16: 1 pc;
- PCIe 2.0 x4: 1 pc;
- PCIe 3.0 x1: 1 pc;
- Combining video cards: CrossFire;
- Video Outputs: DVI-D, HDMI;
- Audio system: 7.1, Realtek ALC887 codec;
- Network adapter: Realtek RTL8111G;
- Fan connection: 2 pcs;
- Power scheme: 4 + 3 phases;
Our findings of buying the best motherboard for Ryzen 5 2600
In this article, we reviewed the best motherboard for Ryzen 5 2600. Most of these boards have proven themselves well among users and you can build your system on their basis. Which motherboard would you choose? Write in the comments!
