Is your Netgear Nighthawk X6 not connecting to internet? If so, then you are in the right place. Netgear happens to be an extremely popular router brand that is well known for it’s exceptional speeds and consistently high performance.
The Netgear Nighthawk X6 is one of the most popular high-performance routers by the company. The Netgear Nighthawk X6 is a very fast router, so it’s really great to use one of these in today’s digitally connected world.
Most of the time when a Netgear Nighthawk X6 not connecting to internet, it’s either something simple or unrelated to the router. It could be a cabling issue or, more commonly, an issue with your modem or the ISP (Internet Service Provider) it is attached to.
There are other, more rarer times, where your Netgear router itself is in some way locked up and just needs to be reset.
Unfortunately, though, there are times in which the Netgear Nighthawk X6 router can have a hard time making a connection to the internet.
In this article, we are going to walk you through common troubleshooting solutions for your Netgear Nighthawk X6 router. Hopefully reading this article will be able to help you get your internet working again!
Does the Netgear Nighthawk X6 Need a Modem?
Yes, but only if you need access to the internet for what you are trying to do. This router is perfectly capable of being used without an internet connection.
For example, if all you are needing to do is send information from one local computer to another on your network, then using this router without the internet will be just fine.
But of course, it’s 2021 and everything happens online. So, even though you can use your Netgear Nighthawk X6 without the internet, you definitely won’t get the most out of your router (or your network) in doing so.
Why is my Netgear Nighthawk X6 Not Connecting to Internet
After you have completed the successful installation of your Netgear Nighthawk X6, you may find that, unfortunately, your Netgear router won’t connect to the internet. There are several factors at play that would cause problems with your router connecting to the internet.
There is a chance that it is not even your router that’s the problem. For example, your Netgear Nighthawk X6 not connecting to internet could be caused by a problem with your modem. Also, it could be something as simple as incorrect settings in the router. You may just get lucky enough for it to be a cable that is not plugged in correctly.
Your brand new Netgear Nighthawk X6 not connecting to internet can be a bummer, so lets go over some of the most common and most likely reasons why your Also, we are going to provide you with some helpful troubleshooting tips so that you can get back online.
Check Your Router’s Configuration Page
Step 1: Open a web browser such as Google Chrome, Firefox, or Microsoft Edge
Step 3: Then, go to www.routerlogin.net
Step 4: Click on Administration
Step 5: Select Router Status
Step 6: Check to see if the internet or WAN port has an IP address
Power Cycle Your Router
You would be surprised, but simply power-cycling your Netgear router can clear out and fix a lot of network bugs. Sometimes small glitches can occur that make some features inoperable.
Step 1: Remove the the power cord from the back of your Netgear Nighthawk X6
Step 2: Wait 60 seconds. This gives the electrical components in your router time to completely drain
Step 3: Then, plug the power cord back into the router
Reboot Your Devices
You may want to consider rebooting your computer or phone. There are little glitches that can sometimes happen with networks. Try resetting everything, including the devices that connect to the network.
Bypass Your Router
If your Netgear Nighthawk X6 is not connecting to internet, one thing you can try to do is bypass the router. Most modems have an ethernet connection that connects to the routers WAN port. If you are struggling to get the internet to work through your router, you may way to see whether or not its working without your router in the equation. Here’s how:
Step 1: Unplug the ethernet cable from your Netgear router’s WAN port
Step 2: Plug that cable into a desktop or laptop computer that has an ethernet port
Step 3: Disconnect the power cord from your modem
Step 4: Wait 30 seconds
Step 5: Plug your modem back in
Step 5: Wait 1 to 5 minutes for your modem to re-establish a connection with your ISP
Step 6: Check to see if the internet works
If you are able to access the internet with your PC connected directly to your modem, then that means something is definitely wrong with your Netgear Nighthawk X6 router.
It could be something as simple as a software configuration, or it could be something wrong with the hardware itself. When your Netgear Nighthawk X6 not connecting to internet, it can be a real pain.
If the internet does not work on your PC while directly connected to your modem, then you know the problem is not with your router. At that point, you might want to check the status lights on your modem.
Considering the situation above, making a phone call to your ISP for support is probably going to be your best bet.